Posted by: bksti sumutnad 2010 | August 9, 2010

BKSTI VI

SEMINAR NASIONAL TEKNIK INDUSTRI

DAN

KONGRES BADAN KERJASAMA

PENDIDIKAN TEKNIK INDUSTRI

BKSTI VI


Hotel Tiara Jln Cut Meutia Medan

5-6 Oktober 2011


DEPARTEMEN TEKNIK INDUSTRI

F A K U L T A S T E K N I K

UNIVERSITAS SUMATERA UTARA

MEDAN

2011


Latar Belakang

Perbelakuan ASEAN Free Trade Area (AFTA) dan China ASEAN Free Trade Area (CAFTA) telah menimbulkan polemik di masyarakat. Perjanjian tersebut ditenggarai dapat mematikan produsen lokal yang selama ini sudah bersusah payah membendung produk asing. Umumnya isi perjanjian perdagangan bebas yang telah kita sepakati, menegaskan pentingnya suatu produktivitas diiringi dengan azas persamaan, keadilan, perlindungan, hak-hak azasi manusia dan lingkungan hidup. Menyadari hal tersebut diatas Badan Kerjasama Pendidikan Tinggi Teknik Industri Indonesia (BKSTI) perlu melakukan bagian dalam pengembangan sistem pendidikan teknik industri untuk menyiapkan sumber daya manusia yang handal yang dapat menjawab tantangan kemajuan Industri Indonesia. Sesuai dengan defenisi Teknik Industri:

Industrial engineering is concerned with the design, improvement and installation of integrated system of people, materials, and equipments, drawing upon specialized knowledge and skill in the mathematical, physica and social sciences together wirh the principle and methods of engineering anlysis and design to specify, predict, and evaluate the results to be obtained from such system.

Maka perlu menumbuhkan pemikiran dan penelitian perbaikan berkaitan  keteknikindustrian di Indonesia, maka BKSTI Sumut Nad menyelenggarakan Seminar Nasional Teknik Industri dan Kongres BKSTI VI dengan tema:

“Peranan Teknik Industri dalam Menghasilkan SDM yang Handal untuk Menghadapi Kemajuan Dunia Industri”

Tujuan

1. Membahas Permasalahan dalam penyelenggaraan pendidikan Teknik Industri untuk kemajuan dan pengembangan Teknik Industri di Indonesia.

2. Membahas dinamika dan tantangan peningkatan mutu pendidikan Teknik Industri di Indonesia.

3.   Sharing hasil-hasil penelitian pemikiran maupun terapan  yang berkenaan dengan tema Seminar Nasional.

4. Sebagai wadah forum tukar pendapat ide dan pengalaman terutama dalam dunia pendidikan Teknik Industri

Waktu dan Tempat Kegiatan

Waktu Kegiatan

Waktu kegiatan “Seminar Nasional Teknik Indsutri dan Kongres Badan Kerjasama Pendidikan Teknik Industri BKSTI VI” ini dilaksanakan pada:

Hari : Rabu S/d Kamis

Tanggal : 5 S/d 6 Oktober 2011

Pukul : 08.00 –17.00


Tempat Kegiatan

Kegiatan akan dilaksanakan di Hotel Tiara

Jln. Cut Meutia Medan-Sumatera Utara.


Peserta Kegiatan

Pada kesempatan Seminar Nasional Teknik industri ini, akan diundang berbagai kalangan baik antara lain :

  1. -Akademisi/ Peneliti dari Universitas/ Institut se Indonesia
  2. -Praktisi/ Perusahaan Swasta/ BUMN
  3. -Pemerintahan

Ruang Lingkup Bahasan

Untuk menyukseskan acara tersebut, panitia seminar nasional Teknik Industri mengundang Bapak/ Ibu/ Saudara untuk berpartisipasi aktif sebagai peserta seminar maupun pembawa makalah dengan ruang lingkup topik bahasan:


1. Prodution Engineering

PPC, Lean Manufacturing, Process Design, Process Integration Modellling Design and Control, Manufacturing System, CIM, FMS, Concurrent Engineering, Advanced Manufacturing Technology, Precision Engineering.


2. Quality Engineering & Management

Quality Function Deployment, Total Quality Managemnet, Customer Statisfaction, Six Sigma, Benchmarking, Design of Eksperiment, Taguchi, Quality Management, Balanced Scorecard, Reliability, Environmental Science, Green Manufacturing, Reliability Engineering, Sig Sigma, Value Strea Mapping, Quality Control, Design of Experiment, Measurement Science and Instrumentation, HACCP, OSHA, ISO, MBNQA, Quality Control Circle, SPC, Response Surface, Sequential Design, Risk Based inspection.Organizational Behaviour, Financial Planning and Cost Engineering, Strategic Planning, HRD Management, Project Management, Risk Management, Technology Management, Business Process Re-engineering, Blue Ocean Strategy


3. Ergonomic

Human Factor Engineering, Product Design, Work System Design, Human Computer Interaction, Occupational Safety and Health., Productivity Optimal Contal and Optimization, Simulation and Automation Control, Cost Reduction.


4. Product Design

Human Factor, Sustainable Design, Living Design, Lighting Design, Acoustic Desugn, Sustainable Design, Stuctural Design, Digital Based Design, Bio-Chemical Engineering, Bio Medical Engineering, Bio-Analytical Science the environment and sustainable technology, Reverse Engineering, Virtual Reality, CAD 4D, Rapid Prototyping.


5. Operation Research

Dynamic System, Transportation System, Linier Programming, Queing System, Markov Process, Network.


6. Decesion Support System

Expert System, Decision Support System, Management Information System, Managing Information Technology and E-Commerce, Knowledge Management, Manufactirung Information System, Artificial Intellligent, Fuzzy, Neural Network, Data Mining, Optimization dan Simulation Modelling, Image dan Speech Recognition, Analytical Hierarchy Process, Games Theory Application, Genentic Algorithm.


7. Supply Chain Management

Supply Chain Management, Supply Chain Design, Supply Chain Implementation, Procurement, Teknologi Imformasi Supply Chain, ERP, EDI,RFID, e-Business, Material Management, Phisycal Distribution, Transportation, Warehause Management, Reverse Logistic, Cloose-Loop Supply Chain, Performance Management, Aspek Finansial Supply Chain.


Jadwal Kritis

a. Batas Pemasukan Abstrak 25 Agustus 2011

b. Pemberitahuan Abstrak diterima 25 Agustus 2011

c. Batas Waktu Pemasukan Makalah 5 September 2011

d. Seminar Nasional 5 Oktober 2011

e. Kongres Nasional 6 Oktober 2011


Makalah akan dipublikasikan dalam bentuk proceding. Informasi tentang abstrak dan makalah dapat dilihat pada situs: https://bkstisumutnad.wordpress.com


Biaya Seminar

Untuk mengikuti seminar ini, setiap peserta memberikan kontribusi biaya sebagai berikut:

Umum        : Rp. 600.000

Pemakalah : Rp. 500.000

Mahasiswa : Rp. 300.000

Biaya Seminar termasuk snack, makan siang, proceding seminar dan sertifikat. Bagi penyaji makalah yang mempresentasikan lebih dari satu makalah akan dikenakan biaya tambahan sebesar Rp. 150.000 / makalah. Biaya Proceding Rp 200.000.


Biaya Seminar

Biaya seminar dapat di Transfer ke :

BANK BNI Cabang USU MEDAN

Account no. 0175654318

a.n : ROSNANI GINTING, IR, MT

Sekretariat Panitia

Departemen Teknik Industri Fakultas Teknik

Universitas Sumatera Utara

Jln Almamater Kampus USU Medan

Sumatera Utara

Telp/Fax : 061-8213251


Contact Person

Untuk informasi lebih lanjut, dapat menghubungi :

Rosnani Ginting (081396747463)

Suliawati (081396783434)

Email     : bksti_sumutnad@yahoo.co.id

Website : https://bkstisumutnad.wordpress.com


FORMULIR PENDAFTARAN

Nama : _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Instansi : _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Alamat : _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Kode Pos : _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Telepon : _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Fax : _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

No. Hp : _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

E-Mail : _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _


KEGIATAN YANG DIIKUTI

Umum/ Praktisi

Pemakalah

mahasiswa


PEMBAYARAN

Pembayaran Kegiatan :

Transfer BANK BNI Cabang USU MEDAN Account no. 0175654318

a.n : ROSNANI GINTING, Ir, MT

Tunai kepada panitia penyelengara

_ _ _ _,_ _ _, 2011

Adapun Pembicara dalam Kongres BKSTI yaitu:

–         Dr. Ir. Kuntoro Mangkusubroto

(Ketua Unit Kerja Presiden Bidang Pengawasan dan  Pengendalian Pembangunan)

–         Ir.  I Made Dana Tangkas

           (Senior General Manager PT. Toyota Motor  Manufacturing Indonesia)

–         Prof. Dr. Harsono Taroepratjeka, MSIE

(Rektor Institut Teknologi Nasional/Mantan Ketua Departemen Teknik Industri USU Angkatan Ke-1)

Posted by: bksti sumutnad 2010 | August 9, 2010

CONTOH PANDUAN PENULISAN NASKAH DALAM JURNAL PENELITIAN

Abstrak dan full paper

abstrak dalam bahasa Indonesia/bahasa Inggris maksimal 250 kata, memuat judul, nama penulis, instansi, dan alamat e-mail. Isi abstrak antara lain mencakup rumusan masalah, metode, kesimpulan ringkas, dan 3-5 kata kunci.

full paper maskimal 8 halaman A4 (termasuk lampiran dan daftar pustaka), huruf Times New Roman 12 ppt, 1 spasi, margin atas bawah, kiri kanan : 3 cm. full paper dalam bentuk soft copy format MS Word. susunan full paper terdiri atas : Judul, Abstrak, Pendahuluan, Metode, Hasil dan Diskusi, Kesimpulan, dan Daftar Pustaka.

Abstrak dan makalah lengkap dikirim ke sekretariat via e-mail.

 

GUIDELINES FOR THE PREPARATION OF PAPER

(Bold, 16 TNR/Times New Roman)

 

 

Bustami Syam (Bold, 12 TNR)

Impact and Fracture Research Center, Department of Mechanical Engineering

University of Sumatera Utara (USU)

Jl. Almamater, Kampus USU Medan 20155 INDONESIA

Phone/Fax.: +62-61- 8212050

E-mail: bustami@usu.ac.id or bustamisyam@yahoo.com

(10 TNR)

 

 

 

Abstract (Bold, 12TNR)

 

This guideline is prepared to serve as a sample paper that should be referred by authors who want to submit paper(s) to the secretariat of the Seminar  Ilmiah dalam rangka Dies Natalis ke-59 USU (SI-DIES 2011). Before you submit the print-ready paper, which is due on July 18th, 2011, please make sure that you send us an abstract, which contains about 200-400 words. The abstract is due on July 15th, 2011. (10 TNR)

 

Keywords: Paper formats, Print-ready manuscript (Bold, 12 TNR)

 

 


1. Introduction (Bold, 12 TNR)

 

All papers presented in Seminar  Ilmiah will be published in the conference proceedings as received condition. So, please make sure that the contributors strictly follow the guidelines for the preparation of paper.

The manuscript (in English) must be submitted in duplicate (one original and one copy), with an electronic copy of the paper on a CD-R (preferably using MS. WORD and PDF format); send them to:

Organizing Committee Secretariat:

 

2. General

  • Paper size             : A4
  • Justification            : full
  • Line-space             : single space
  • Column                  : single column for the title and abstract; double column for the text.
  • Margin                   : 2.5 cm (top and bottom); 3 cm (left); 1.5 cm (right)
  • Font type               : Times New Roman (TNR)
  • Page numbering     : Please DO NOT type the page number, but number each sheet lightly near the bottom, using a pencil.
  • Length of paper      : The length of a paper is limited to 10 pages of A4 size paper, inclusive of tables and figures.
  • Indentation             : Indent 0.7 cm for each new paragraph.
  • Headings               : Major headings should be typed in 12 point boldface upper and lower case, flushed left and numbered 1, 2, etc. (full stop is not required).
  • Text Size               : 11 TNR

3.  Paper Outline

3.1. Title of paper (11 TNR)

The first page should contain the exact title of the paper (Boldface 16 TNR), the name(s) of the author(s) (Boldface 12 TNR), the organization (s) they are affiliated with, full mailing addresses, and e-mail addresses (10TNR). DO NOT includes the author’s titles, positions or degrees (e.g. Prof., Dr., Ir., etc.)

 

3.2. Abstract

 

An abstract of the paper, of not more than 150 words, should be included and it should state clearly the objectives, scope and salient conclusions. The abstract should be written in a paragraph with an indentation of 0.8 cm from both ends.

 

3.3. Text

 

The abstract should be followed by the main body of the paper. The main body of the paper should start with an introduction and the rest of the paper should be sub-divided into appropriate sections and, and if necessary, sub-sections, each with a relevant heading.

The text may contain illustrations and mathematical equations. Number all illustrations in a single sequence, i.e., 1, 2, 3 … etc. and have a title. Graphs and diagrams should be professionally prepared; freehand or typewritten labeling is NOT acceptable. Submit them as glossy black and white prints. PLEASE DO NOT SUBMIT COLOR GRAPHS. Photographs should be supplied as top quality glossy prints. Any lettering, etc., must contrast well with the background.

All tables included in the paper should be numbered consecutively and have a caption consisting of the table number and a brief title. Place the table caption above the table.

Equations should be numbered consecutively beginning with (1) to the end of paper. The number should be enclosed in parentheses (as shown above) and set flush right in the column on the same line as the equation. An example of an equation is shown in Eq. 1.

 

[M] {} + [K] {d}= {R}             (1)

 

Conclusions

 

The paper should end with a section entitled “Conclusions”, in which significant implications of the information presented in the body of the paper are reviewed.

 

Acknowledgements

 

Acknowledgements may be made to individuals or institutions not mentioned elsewhere in the paper who have made an important contribution.

 

References

 

In the text, all references to books or articles should be numerically referenced and denoted by [1], [2], [3], etc. A list of references should be given at the end of the text, according to the order they were written in the text. References to published papers should contain the names of all the authors of the paper, the title of paper, the name of the publication in italics, the volume number, the year of publication, and the number of the first and last pages separated by a hyphen. References to books should contain the names of all the authors, the title of the book in italics, the publisher’s name, and the year of publication or edition. Please refer the following examples:

 

[1]. Syam, B., FEM Simulation of Tube Extrusion Process, Proceedings Regional Seminar on Computational Methods and Simulation in Engineering, Bandung, Oct., 1997, pp.VII.B.6- 1-10.
[2]. Goldsmith, W., C.K.H. Dharan, and H. Chang, Quasi-static and Ballistic Perforation of Carbon Fiber Laminates, Int. J. Solid Struct., Vol. 32, pp. 89-103, 1995.
[3]. Owen, D.R.J. and E. Hinton, Finite Elements in Plasticity: Theory and Practice, Pineridge Press Limited, Swansea, U.K., 1980.
Posted by: bksti sumutnad 2010 | July 27, 2010

Hotel Berbintang dan obyek wisata di Sumatera Utara

 

Di bawah ini beberapa  hotel di Medan antara lain:

GRAND ANGKASA(****)

Jl.Sutomo No. 1 Medan

Telp     : 061-4555888

Fax       : 62-61-4550555

Kamar  : 266

DANAU TOBA INTERNASIONAL (****)

Jl. Imamm Bonjol No. 17 POBOX 490 Medan 20152

Telp/Fax  : 061-4555888

Telex        : 51167 DHTT

Kamar     : 256

NOVOTEL SOECHI(****)

Jl. Cirebon No. 76 Plaza Hongkong Medan

Telp     : 061-4561234/4572222

Kamar  : 247

QUALITY(****)

Jl. Listrik No. 5 Medan

Telp         : 061-4535888

Fax          : 061-4534111

Kamar     : 50

ASEAN INTERNASIONAL (****)

Jl. H. Adam Malik No. 5 Medan

Telp         : 061-4563888

Fax          : 061-4561965

Kamar     : 174

TIARA (****)

Jl. Cut Mutia POBOX 328 Medan 20152

Telp     : 061-4574000, 4538880

Telex   : 51721 GRIYA IA

Fax      : 061-4510176, 4513720

Kamar : 256

POLONIA (****)

Jl. Jenderal Sudirman No. 14-18 POBOX 303 Medan 20151

Telp         : 061-4535111

Fax          : 061-4519553, 4517656

Telex        : 51376

Kamar     : 174

GARUDA PLAZA (***)

Jl. Sisingamangaraja No. 18 POBOX 353 Medan 20213

Telp/ Fax : 061-736111/7364411

Telex        : 51642

Kamar     : 151

SAHID HOTEL (***)

Jl. Sisingamangaraja No. 11 Medan

Telp/ Fax : 061-7879070/7879147

Kamar     : 150

SEMARAK INTERNASIONAL

Jl. Sisingamangaraja No. 50 Medan 20217

Telp          : 061-73558888

Fax           : 061-7355777

Kamar      : 105

INNA DHARMA DELI (***)

Jl. Balai Kota No. 2 Medan 20111

Telp          : 061-73558888

Telex         : 51362

Fax           : 62-61-4557744,4547744

Kamar      : 180

EMERALD GARDEN INT (***)

Jl. K.L. Yos Sudarso No.1 Medan

Telp          : 62-61-6611888

Fax           : 62-61-6622888

Kamar      : 163

MADANI HOTEL

Jl. Sisingamaraja/Alumanium No. 1 Medan 20215

Telp          : 62-61-73580000,7368800

Fax           : 061-7367779, 7368705

Website    : www.madani-hotel.com

ARYA DUTA HOTEL

Jl. Kapten Maulana Lubis No. 8 MEDAN

Telp          : 62-61-4572999, 4579470

Fax           : 62-61-4571999

Website    : www.aryaduta.com

Wisata Sumatera Utara

Danau Toba Parapat

Danau toba tuk-tuk

Pulau Samosir Sigale-gale

Simalem Resort

Air Terjun Sipiso-piso Tongging

Brastagi Gundaling

 

Wisata Petik Buah Sendiri Brastagi

Pemandian Air Panas Lau Debu-debu

Bukit Lawang

Masjid Raya Medan

Istana Maimun

Museum Internasional Rahmat Syah

Tjong Afie


Posted by: bksti sumutnad 2010 | July 27, 2010

Hello world!

Welcome to WordPress.com. This is your first post. Edit or delete it and start blogging!

Categories